
ENGCB223-22B (HAM)
Fluid Mechanics
15 Points
Staff
Convenor(s)
Michael Walmsley
4701
G.3.04
michael.walmsley@waikato.ac.nz
|
|
Administrator(s)
Tutor(s)
Librarian(s)
You can contact staff by:
- Calling +64 7 838 4466 select option 1, then enter the extension.
-
Extensions starting with 4, 5, 9 or 3 can also be direct dialled:
- For extensions starting with 4: dial +64 7 838 extension.
- For extensions starting with 5: dial +64 7 858 extension.
- For extensions starting with 9: dial +64 7 837 extension.
- For extensions starting with 3: dial +64 7 2620 + the last 3 digits of the extension e.g. 3123 = +64 7 262 0123.
Paper Description
This course covers the basic principles of fluid mechanics. Topics include fluid statics, fluid dynamics, Bernoulli and energy equations, momentum analysis of flow structures, flow measurement, dimensional analysis, internal flow in pipes and ducts, external flow over streamlined and bluffed bodies, pump sizing and selection, turbomachinery and an introduction to compressible flow.
The learning outcomes for this paper are linked to Washington Accord graduate attributes WA1-WA11. Explanation of the graduate attributes can be found at: https://www.ieagreements.org/assets/Uploads/Documents/IEA-Graduate-Attributes-and-Professional-Competencies-2021.1-Sept-2021.pdf
Paper Structure
The paper content is delivered through a combination of online mini-lectures, face-to-face lectures, face-to-face laboratories and workshops, and face-to-face tutorials.
Please note that the Lectures and Tutorials start in the first week of the trimester (starting from Tuesday), laboratories start in the second week, the Water Rocket challenge workshops start in the fifth week. All of these activities are an essential part of the learning for this paper.
Learning Outcomes
Students who successfully complete the paper should be able to:
Assessment
Samples of your work may be required as part of the Engineering New Zealand accreditation process for BE(Hons) degrees. Any samples taken will have the student name and ID redacted. If you do not want samples of your work collected then please email the engineering administrator, Natalie Shaw (natalie.shaw@waikato.ac.nz), to opt out.The learning outcomes are assessed using a combination of:
Tutorial Assignments (10%)
There will be five tutorial assignments worth 2% each.
Laboratory Assignments (15%)
There will be five laboratory assignments worth 3% each.
Test (15%) - 2 hour
There will be a 2 hour face-to-face test in the LG.01 on Tuesday 13 Sept 6 - 8 pm. The format will be discussed in class prior to the test. You may bring 1 x A4 sheet written on both sides into the test.
Water Rocket Challenge (10%)
Starting from week 5 each laboratory group will design and build a water rocket that is powered by a maximum air pressure of 60 psi. The rocket that travels the furthest horizontal distance (2.5%) and can land the closest to a target (2.5%) will be the winner. Each student is also required to submit a brief report along with an excel spreadsheet model of the flight of the rocket (5%). The launch competition will be held on Monday 10 Oct from 9am - 12noon on the university field near the Swimming Pool.
Exam (50%) - 3 hour
The final Exam will be face-to-face and closed book. Programmable calculators, not containing stored information, are allowed. A formula sheet will be provided. The format of the Exam will be discussed in the tutorials during the last week of the course. Students must get a minimum of 40% in the exam to pass the paper.
Assessment Components
The internal assessment/exam ratio (as stated in the University Calendar) is 50:50. The final exam makes up 50% of the overall mark.
Required and Recommended Readings
Required Readings
Çengel, Y.A., & Cimbala, J. M. (2020). Fluid Mechanics: Fundamentals and Applications. Fourth Edition, McGraw Hill Publication
Online Support
This paper has a Moodle page (http://elearn.waikato.ac.nz) where you will be able to access lecture notes, lecture recordings, and assessment materials. There are also discussion forums where you can both ask and answer questions.
PLEASE NOTE: Moodle will be used for class notices etc. and it is your responsibility to check the site regularly. Instructions provided on Moodle and in lectures are considered to be given to the class as a whole.
Workload
36 hr 'Lectorials', 14 hr of labs, 12 hr of Tutorials plus 88 hr for viewing mini lectures, assessment and independent study.
Linkages to Other Papers
Prerequisite(s)
Prerequisites: ENGEN110, ENGME221, ENGCV223
Restriction(s)
Restricted papers: ENGCV223 or ENGME323