ENGCB280-18B (HAM)

Process Engineering Design 1

15 Points

Edit Header Content
Faculty of Science and Engineering
Te Mātauranga Pūtaiao me te Pūkaha
School of Engineering

Staff

Edit Staff Content

Convenor(s)

Mark Lay

Mark Lay
4556
D.G.20
To be advised
mark.lay@waikato.ac.nz

Lecturer(s)

Graeme Glasgow

Graeme Glasgow
5269
CD.3.02
To be advised
graeme.glasgow@waikato.ac.nz

Johan Verbeek

Johan Verbeek
4947
C.3.01
To be advised
johan.verbeek@waikato.ac.nz

Administrator(s)

Placement Coordinator(s)

Tutor(s)

Student Representative(s)

Lab Technician(s)

Librarian(s)

You can contact staff by:

  • Calling +64 7 838 4466 select option 1, then enter the extension.
  • Extensions starting with 4, 5 or 9 can also be direct dialled:
    • For extensions starting with 4: dial +64 7 838 extension.
    • For extensions starting with 5: dial +64 7 858 extension.
    • For extensions starting with 9: dial +64 7 837 extension.
Edit Staff Content

Paper Description

Edit Paper Description Content
The paper builds on the introduction to engineering design taught in ENGEN180. This paper covers mass balances around reactors, biological systems and separation processes used by chemical and environmental engineers in process design for chemical, biological and materials manufacturing plants and for water and waste water treatment systems. Students will be taught CAD tools for block flow diagrams, process flow diagrams, process and instrumentation diagrams, and batch and continuous process modelling using software tools. The students will apply these techniques to solve process design problems. Students in this course will also design and build a car powered by a chemical reaction for participation in a competition at the Engineering Design Show in October, and winners will participate in the ChemE car competition run by IChemE.
Edit Paper Description Content

Paper Structure

Edit Paper Structure Content
The course will be taught using a combination of lectures, readings, computer labs and laboratory work.
Edit Paper Structure Content

Learning Outcomes

Edit Learning Outcomes Content

Students who successfully complete the course should be able to:

  • Be able to convert a process description into a block flow and process flow diagram
    Linked to the following assessments:
  • Be able to perform a general and component mass balance based on information provided in the process description and block/process flow diagram
    Linked to the following assessments:
  • Be able to use molar balances and concentrations to generate a mass balance
    Linked to the following assessments:
  • Be able to perform a degree of freedom analysis to determine whether or not a mass balance can be completed and to determine what additional information is required
    Linked to the following assessments:
  • Be able to perform a mass balance for a system with one or more recycles
    Linked to the following assessments:
  • Be able to perform a mass balance on a dynamic system such as a tank, diffusion, adsorption, reaction
    Linked to the following assessments:
  • Be able to generate P&IDs for a process description and block and process flow diagram using AutoCAD
    Linked to the following assessments:
  • Be able to use Excel for solving simple mass balances, recycles, and dynamic systems
    Linked to the following assessments:
  • Be able to design and build a car driven by a chemical reaction
    Linked to the following assessments:
Edit Learning Outcomes Content
Edit Learning Outcomes Content

Assessment

Edit Assessments Content
Assessment information such as marking schedules, report layouts and so on will be provided with course handouts, assignment briefs and lab manuals.
Edit Additional Assessment Information Content

Assessment Components

Edit Assessments Content

The internal assessment/exam ratio (as stated in the University Calendar) is 70:30. There is no final exam. The final exam makes up 30% of the overall mark.

The internal assessment/exam ratio (as stated in the University Calendar) is 70:30 or 0:0, whichever is more favourable for the student. The final exam makes up either 30% or 0% of the overall mark.

Component DescriptionDue Date TimePercentage of overall markSubmission MethodCompulsory
1. Exam
30
✔
2. Solidworks Assignment
27 Jul 2018
No set time
4
  • Online: Submit through Moodle
3. Excel-Mass Balance Assignment
10 Aug 2018
No set time
4
  • Online: Submit through Moodle
4. Excel-Recycle Assignment
14 Sep 2018
No set time
4
  • Online: Submit through Moodle
5. Excel-Dynamic/Combined Energy and Mass Balance Assignment
28 Sep 2018
No set time
4
  • Online: Submit through Moodle
6. AutoCAD - Process and Instrumentation Diagram Assignment
12 Oct 2018
No set time
4
  • Online: Submit through Moodle
7. Test 1
16 Aug 2018
No set time
10
  • In Class: In Lecture
8. Test 2
11 Oct 2018
No set time
10
  • In Class: In Lecture
9. ChemE Car Project
16 Oct 2018
No set time
30
  • Online: Submit through Moodle
Assessment Total:     100    
Failing to complete a compulsory assessment component of a paper will result in an IC grade
Edit Assessments Content

Required and Recommended Readings

Edit Required Readings Content

Recommended Readings

Edit Recommended Readings Content

Felder and Rousseau, Elementary Principles of Chemical Processes.

Murphy, Introduction to Chemical Processes: Principles, Analysis, Synthesis

Edit Recommended Readings Content

Other Resources

Edit Other Resources Content
Moodle
Edit Other Resources Content

Online Support

Edit Online Support Content

This paper has a Moodle page (http://elearn.waikato.ac.nz) where class notices, assignments, and readings will be given (unless handed out in class)

Edit Online Support Content

Workload

Edit Workload Content
Six contact hours per week, 10-12 hours per week reading, assignments and independent study.
Edit Workload Content

Linkages to Other Papers

Edit Linkages Content

Prerequisite(s)

Prerequisite papers: ENGEN180 or ENGG180

Corequisite(s)

Equivalent(s)

Restriction(s)

Restricted papers: ENGG282

Edit Linkages Content