ENGCV251-21A (HAM)

Construction 1

15 Points

Edit Header Content
Division of Health Engineering Computing & Science
School of Engineering

Staff

Edit Staff Content

Convenor(s)

Lecturer(s)

Administrator(s)

: mary.dalbeth@waikato.ac.nz
: natalie.shaw@waikato.ac.nz

Placement/WIL Coordinator(s)

Tutor(s)

Student Representative(s)

Lab Technician(s)

Librarian(s)

: cheryl.ward@waikato.ac.nz
: debby.dada@waikato.ac.nz

You can contact staff by:

  • Calling +64 7 838 4466 select option 1, then enter the extension.
  • Extensions starting with 4, 5, 9 or 3 can also be direct dialled:
    • For extensions starting with 4: dial +64 7 838 extension.
    • For extensions starting with 5: dial +64 7 858 extension.
    • For extensions starting with 9: dial +64 7 837 extension.
    • For extensions starting with 3: dial +64 7 2620 + the last 3 digits of the extension e.g. 3123 = +64 7 262 0123.
Edit Staff Content

Paper Description

Edit Paper Description Content

An understanding of the properties, limitations, and selection of materials used in civil engineering construction is fundamental for a practicing civil engineer. Hence, this paper covers in more detail the physical, chemical, and mechanical properties of common civil materials such as concrete, timber, aluminium, and composites. The paper also introduces the students to construction process methodologies, planning, documentation, health and safety, and environment. Additional topics such as cost estimation and risk management will also be taught.

Edit Paper Description Content

Paper Structure

Edit Paper Structure Content

This paper is taught through lectures and practical laboratory sessions. In addition, a site visit will be scheduled in the second half of the trimester (time TBC). Students are required to provide their own steel-capped boots (safety shoes).

Practicals: Four 2-hour sessions run at one session per week. Practical sessions to be held on Mondays, Tuesdays, Wednesdays and Fridays (between 11am-1pm) from the 2nd week of Trimester A. Lab groups are to be assigned during the 1st week of Trimester A.

IMPORTANT NOTE for students - Laboratory Handbook

An electronic copy of the laboratory handbook required for this paper will be provided via Moodle page.

Laboratory worksheets and reports are a very important part of this paper and attendance at laboratory sessions is compulsory.

Important Note for International Students: For international students in New Zealand under student visas, regular attendance is part of your visa obligation and is checked as a requirement on the University under the Code of Practice for the Pastoral Care of International Students, to which the University is a signatory. Academic staff are formally required to monitor attendance in classes and submission of compulsory assessment events/items and to report to Waikato International in the event that any problem with irregular attendance or non-submission is not resolved.

Edit Paper Structure Content

Learning Outcomes

Edit Learning Outcomes Content

Students who successfully complete the paper should be able to:

  • Explain the behaviour of common construction materials (e.g. concrete, timber, aluminium) based on the fundamental material properties (WA1)
    Linked to the following assessments:
  • Apply knowledge of material structure, including imperfections to predict the behaviour of different materials (WA2)
    Linked to the following assessments:
  • Describe and explain the factors affecting material choice and construction methods for civil engineering projects (WA1,2)
    Linked to the following assessments:
  • Explain the cost estimation process and risk management in a construction project (WA2,11)
    Linked to the following assessments:
  • Describe and explain the key elements of the construction process (WA2,10,11)
    Linked to the following assessments:
Edit Learning Outcomes Content
Edit Learning Outcomes Content

Assessment

Edit Assessments Content

This paper facilitates the development of technical writing, an important competency expected of a scientist and engineer. In order to pass this paper, students are expected to demonstrate their ability to produce written work of an adequate standard. Learning outcomes will be assessed by means of a combination of tests, laboratory worksheets, laboratory report, site visit report, quizzes and a final exam.

Edit Additional Assessment Information Content

Assessment Components

Edit Assessments Content

The internal assessment/exam ratio (as stated in the University Calendar) is 65:35. There is no final exam. The final exam makes up 35% of the overall mark.

The internal assessment/exam ratio (as stated in the University Calendar) is 65:35 or 0:0, whichever is more favourable for the student. The final exam makes up either 35% or 0% of the overall mark.

Component DescriptionDue Date TimePercentage of overall markSubmission MethodCompulsory
1. Test 1
1 Apr 2021
10:00 AM
10
2. Test 2
27 May 2021
10:00 AM
10
3. Quizzes
12
4. Laboratory sessions and report
26
5. Site visit report
7
6. Exam
35
Assessment Total:     100    
Failing to complete a compulsory assessment component of a paper will result in an IC grade
Edit Assessments Content

Required and Recommended Readings

Edit Required Readings Content

Required Readings

Edit Required Readings Content

Fundamentals of Building Construction: Materials and Methods by Edward Allen, and Joseph Iano

Edit Required Readings Content

Online Support

Edit Online Support Content
Handouts for this paper will be available on Moodle for students to download. This will be confirmed by the lecturer concerned. It will also be assumed that students check their e-mail at the address recorded in Moodle at least once per day.
Edit Online Support Content

Workload

Edit Workload Content

The expected workload for this paper would be expected to average at approximately 36 hours for lectures, 2 hours for tests, 8 hours for laboratory work, 44 hours for completing laboratory and site visit reports, and 61 hours for quizzes, reading and revision.

Edit Workload Content

Linkages to Other Papers

Edit Linkages Content

Prerequisite(s)

Prerequisite papers: ENMP102 or ENGEN112

Corequisite(s)

Equivalent(s)

Restriction(s)

Restricted papers: ENMP211 or ENGMP211

Edit Linkages Content