ENGEE233-21A (HAM)

Digital Electronics and Microprocessors

15 Points

Edit Header Content
Division of Health Engineering Computing & Science
School of Engineering

Staff

Edit Staff Content

Convenor(s)

Lecturer(s)

Administrator(s)

Placement/WIL Coordinator(s)

Tutor(s)

Student Representative(s)

Lab Technician(s)

Librarian(s)

: cheryl.ward@waikato.ac.nz
: debby.dada@waikato.ac.nz

You can contact staff by:

  • Calling +64 7 838 4466 select option 1, then enter the extension.
  • Extensions starting with 4, 5, 9 or 3 can also be direct dialled:
    • For extensions starting with 4: dial +64 7 838 extension.
    • For extensions starting with 5: dial +64 7 858 extension.
    • For extensions starting with 9: dial +64 7 837 extension.
    • For extensions starting with 3: dial +64 7 2620 + the last 3 digits of the extension e.g. 3123 = +64 7 262 0123.
Edit Staff Content

Paper Description

Edit Paper Description Content

This 15pt paper provides students with an introduction to digital electronics and microprocessors. It covers combinatorial and sequential logic, hardware description languages, and processor architecture and construction.

Edit Paper Description Content

Paper Structure

Edit Paper Structure Content

The paper consists of lectures and laboratories. All lectures are taught by Dr Nelson (Computer Science). Six laboratories are to be completed, three in the Electronics Laboratory C1.04 and three as online coding exercises.

Important Note for International Students: For international students in New Zealand under student visas, regular attendance is part of their visa obligation and is checked as a requirement on the University under the Code of Practice for the Pastoral Care of International Students, to which the University is a signatory. Staff are formally required to monitor attendance at / submission of compulsory assessment events/items and to report to the International Centre in the event that any problem with irregular attendance or non-submission is not resolved.

Edit Paper Structure Content

Learning Outcomes

Edit Learning Outcomes Content

Students who successfully complete the paper should be able to:

  • design circuits with logic gates and/or FPGAs
    Linked to the following assessments:
  • specify, optimize and implement a finite state machine
    Linked to the following assessments:
  • design, simulate and test circuits using a hardware description language.
    Linked to the following assessments:
  • identify the principal components and describe the operation of a RISC microprocessor
    Linked to the following assessments:
Edit Learning Outcomes Content
Edit Learning Outcomes Content

Assessment

Edit Assessments Content

Assessment Components

Edit Assessments Content

The internal assessment/exam ratio (as stated in the University Calendar) is 50:50. There is no final exam. The final exam makes up 50% of the overall mark.

The internal assessment/exam ratio (as stated in the University Calendar) is 50:50 or 0:0, whichever is more favourable for the student. The final exam makes up either 50% or 0% of the overall mark.

Component DescriptionDue Date TimePercentage of overall markSubmission MethodCompulsory
1. Laboratories
20
  • Hand-in: In Lab
  • Online: Submit through Moodle
2. Assignment 1
3 May 2021
11:30 PM
7.5
3. Assignment 2
4 Jun 2021
11:30 PM
7.5
4. Quizzes
5
  • Online: Submit through Moodle
5. In-class Test
14 Apr 2021
10:00 AM
10
6. Exam
50
Assessment Total:     100    
Failing to complete a compulsory assessment component of a paper will result in an IC grade
Edit Assessments Content

Required and Recommended Readings

Edit Required Readings Content

Recommended Readings

Edit Recommended Readings Content

Mano, M. M. and Ciletti, M. D., Digital Design: With an Introduction to the Verilog HDL, 5th edn., Prentice Hall, 2012. (4th Edn. is also acceptable.)

Edit Recommended Readings Content

Online Support

Edit Online Support Content

A Moodle page (http://elearn.waikato.ac.nz) will operate for this paper. Lecture notes and assignments will be posted on Moodle. Other materials may be posted on Moodle. Some of the computer exercises and assignments will be required to be submitted via Moodle.

Edit Online Support Content

Workload

Edit Workload Content

3h lectures per week, six 3h laboratories for a total of 54 contact hours. A further 6h per week are allowed for personal study, assignments and quizzes and 3 days of study for the exam. With the exam that totals 153h.

Edit Workload Content

Linkages to Other Papers

Edit Linkages Content

ENGEE233 is a specified paper in the BE electronics programme.

Edit Linkages Content

Prerequisite(s)

Prerequisites: (ENGEN111 and ENGEN103) or COMPX102

Corequisite(s)

Equivalent(s)

Restriction(s)

Restricted papers: ENEL212

Edit Linkages Content