ENGEN11019T (HAM)
Engineering Mechanics
15 Points
Staff
Convenor(s)
Yusuke Mochida
5068
D.G.06
To be advised
yusuke.mochida@waikato.ac.nz

Lecturer(s)
Alista Fow
To be advised
alista.fow@waikato.ac.nz

Yusuke Mochida
5068
D.G.06
To be advised
yusuke.mochida@waikato.ac.nz

Librarian(s)
You can contact staff by:
 Calling +64 7 838 4466 select option 1, then enter the extension.

Extensions starting with 4, 5, 9 or 3 can also be direct dialled:
 For extensions starting with 4: dial +64 7 838 extension.
 For extensions starting with 5: dial +64 7 858 extension.
 For extensions starting with 9: dial +64 7 837 extension.
 For extensions starting with 3: dial +64 7 2620 + the last 3 digits of the extension e.g. 3123 = +64 7 262 0123.
Paper Description
The concepts of equilibrium of rigid bodies, structures such as trusses, and mechanisms and the use of equilibrium equations to calculate forces due to applied loads are covered in statics. Free body diagrams, a fundamental tool for Engineers, are used extensively in the paper. The kinematic relationship (relationship between displacement, velocity and acceleration and the relationship between forces and acceleration (Newton's laws of motion)) and energy methods are covered in dynamics.
Paper Structure
Learning Outcomes
Students who successfully complete the course should be able to:
Assessment
Assessment Components
The internal assessment/exam ratio (as stated in the University Calendar) is 100:0. There is no final exam.
Required and Recommended Readings
Required Readings
Lecture notes available on Moodle
Recommended Readings
Mechanics for Engineers, Statics. R.C. Hibbeler SI Edition (13th or 14th edition). Either ebook or hard copy.
Mechanics for Engineers, Dynamics. R.C. Hibbeler SI Edition (13th or 14th Edition). Either ebook or hard copy.
Other Resources
Some interactive programs to learn parts of the statics component of the course will be available for downloading from Moodle. These can be run on Windows.
Online Support
Workload
Lectures: 36 hours
Total number of contact hours: 36 hours
Assignments: 20 hours
Test preparation: 20 hours
Self study: 60 hours
Total number of noncontact hours: 100 hours
Note: For every hour in class it is expected you spend around an hour out of class on other activities such as practicing examples, reviewing notes etc.
Linkages to Other Papers
Prerequisite(s)
Prerequisites: (14 credits at Level 3 in NCEA Physics or one of PHYS100 or PHYSC100 or B grade in ENGEN100) and (16 credits at Level 3 in NCEA Calculus or one of MATH165, MATHS165 or a B in CAFS011 or FOUND011)
Restriction(s)
Restricted papers: ENGG110