ENGEN112-18B (HAM)

Materials Science and Engineering

15 Points

Edit Header Content
Faculty of Science and Engineering
Te Mātauranga Pūtaiao me te Pūkaha
School of Engineering

Staff

Edit Staff Content

Convenor(s)

Lecturer(s)

Administrator(s)

Placement Coordinator(s)

Tutor(s)

Student Representative(s)

Lab Technician(s)

Librarian(s)

: cheryl.ward@waikato.ac.nz
: debby.dada@waikato.ac.nz

You can contact staff by:

  • Calling +64 7 838 4466 select option 1, then enter the extension.
  • Extensions starting with 4, 5 or 9 can also be direct dialled:
    • For extensions starting with 4: dial +64 7 838 extension.
    • For extensions starting with 5: dial +64 7 858 extension.
    • For extensions starting with 9: dial +64 7 837 extension.
Edit Staff Content

Paper Description

Edit Paper Description Content

Engineers/technologists/scientists in all disciplines encounter and use materials in their various practices. In order to function effectively, an understanding of the properties and behaviour of materials is required. This is particularly relevant in design and maintenance, when important decisions need to be made on the choice of materials to be used in a component. It is also possible to tailor or engineer the properties of materials to suit a particular application. This course provides an introduction to the field of Materials Science and Engineering, satisfying the introductory materials science requirements for first year engineering programs. The course will also be of interest to those who wonder why we use different materials for particular applications, why items seem to fail for “no good reason” and what the difference is between strong, tough, hard.

Edit Paper Description Content

Paper Structure

Edit Paper Structure Content

The paper content is delivered through a mix of lectures, tutorials and laboratory sessions.

Important Note for International Students: For international students in New Zealand under student visas, regular attendance is part of your visa obligation and is checked as a requirement on the University under the Code of Practice for the Pastoral Care of International Students, to which the University is a signatory. Academic staff are formally required to monitor attendance in classes and submission of compulsory assessment events/items and to report to Waikato International in the event that any problem with irregular attendance or non-submission is not resolved.

Edit Paper Structure Content

Learning Outcomes

Edit Learning Outcomes Content

Students who successfully complete the course should be able to:

  • name and describe the types of primary and secondary bonds and explain what influence bond type can have on the observed properties of materials
    Linked to the following assessments:
  • calculate stress, strain and stiffness and interpret a tensile stress/strain graph
    Linked to the following assessments:
  • define strength, hardness, stiffness and toughness and realise that they are not interchangeable
    Linked to the following assessments:
  • describe different types of failure and failure processes (ductile, brittle, fatigue and creep) and recognise the characteristic fracture surfaces that some of these show
    Linked to the following assessments:
  • predict and describe different types of wet corrosion
    Linked to the following assessments:
  • name the 5 groups of materials (ceramics, metals, polymers, composites, semiconductors) and describe the common features of these groups
    Linked to the following assessments:
  • name the common types of steels, irons and some of the common non-ferrous metals and be able to recommend them for suitable applications based on their inherent advantages and disadvantages
    Linked to the following assessments:
  • explain: factors that influence electrical conductivity; basic thermal properties and the reason for thermal shock; the origin of permanent magnetic behaviour
    Linked to the following assessments:
Edit Learning Outcomes Content
Edit Learning Outcomes Content

Assessment

Edit Assessments Content

This paper facilitates the development of technical writing, an important competency expected of a scientist and engineers. In order to pass this paper, students are expected to demonstrate their ability to produce written work of an adequate standard.

Edit Additional Assessment Information Content

Assessment Components

Edit Assessments Content

The internal assessment/exam ratio (as stated in the University Calendar) is 50:50. There is no final exam. The final exam makes up 50% of the overall mark.

The internal assessment/exam ratio (as stated in the University Calendar) is 50:50 or 0:0, whichever is more favourable for the student. The final exam makes up either 50% or 0% of the overall mark.

Component DescriptionDue Date TimePercentage of overall markSubmission MethodCompulsory
1. Two tests
20
2. Tutorial assignments
10
  • Hand-in: Faculty Information (FG Link)
3. Lab reports
20
  • Hand-in: Faculty Information (FG Link)
4. Exam
50
Assessment Total:     100    
Failing to complete a compulsory assessment component of a paper will result in an IC grade
Edit Assessments Content

Required and Recommended Readings

Edit Required Readings Content

Recommended Readings

Edit Recommended Readings Content

The recommended book to support this course is: Materials Science & Engineering, An Introduction; 9th edition; William D Callister, Jr.; John Wiley & Sons, Inc.

IMPORTANT NOTE for students - Lecture Notes Book and Lab & Tutorial Resource Book: Please collect your Lecture Notes Book and Lab & Tutorial Resource Book from the Waikato Print Shop (by the Shops down by the Uni. Lake), during the first week of teaching. A printing fee is charged to the student on collection of the books.
Edit Recommended Readings Content

Online Support

Edit Online Support Content

This course has a Moodle site (elearn.waikato.ac.nz) associated with it, providing discussion forums and access to additional resources.

PLEASE NOTE: Moodle will be used for class notices etc and it is your responsibility to check the site regularly. Instructions provided on Moodle and in lectures are considered to be given to the class as a whole.

Edit Online Support Content

Workload

Edit Workload Content

You are expected to attend the three 1-hour lectures, a 1-hour tutorial each week and a 3-hour laboratory once a fortnight. It is also expected that 4-5 hours a week of private study will be required to meet the demands of this paper.

Edit Workload Content

Linkages to Other Papers

Edit Linkages Content

Required prerequisite for ENGMP213, ENGCV212, ENGCV251, ENGCV231. Can be used as a prerequisite for ENGMP211.

Edit Linkages Content

Prerequisite(s)

Corequisite(s)

Equivalent(s)

Restriction(s)

Restricted papers: ENMP102

Edit Linkages Content