ENGEN272-19C (HAM)

Engineering Work Placement 1

30 Points

Edit Header Content
Division of Health Engineering Computing & Science
School of Engineering

Staff

Edit Staff Content

Convenor(s)

Peter Kovalsky

Peter Kovalsky
4582
F.G.06D
To be advised
peter.kovalsky@waikato.ac.nz

Lecturer(s)

Administrator(s)

Placement Coordinator(s)

Tutor(s)

Student Representative(s)

Lab Technician(s)

Librarian(s)

: debby.dada@waikato.ac.nz

You can contact staff by:

  • Calling +64 7 838 4466 select option 1, then enter the extension.
  • Extensions starting with 4, 5, 9 or 3 can also be direct dialled:
    • For extensions starting with 4: dial +64 7 838 extension.
    • For extensions starting with 5: dial +64 7 858 extension.
    • For extensions starting with 9: dial +64 7 837 extension.
    • For extensions starting with 3: dial +64 7 2620 + the last 3 digits of the extension e.g. 3123 = +64 7 262 0123.
Edit Staff Content

Paper Description

Edit Paper Description Content
Students are required to have successfully completed ENGEN270 in order to commence this paper. The work placement is intended to develop professional skills through work in a relevant professional workplace, as students work alongside professional engineers. Work placements allow students to observe professional practice and workplace cultures and consider potential careers. Students will be provided opportunity to apply knowledge and skills learnt at university and develop technical knowledge and skills, interpersonal skills, and a professional work ethic.
Edit Paper Description Content

Paper Structure

Edit Paper Structure Content
This paper requires students to be in a relevant workplace for at least 400 hours, reporting to a workplace supervisor. There are no set lectures or workshops. All interactions with University staff are through Moodle, email, phone and/or site visits.
Edit Paper Structure Content

Learning Outcomes

Edit Learning Outcomes Content

Students who successfully complete the course should be able to:

  • To be able to set learning objectives for their work placements and provide information on progress of achieving these learning objectives
    Linked to the following assessments:
  • Show ability to reflect on learning progression by completing the reflection assignment
    Linked to the following assessments:
  • Evidence the ability to put engineering knowledge into meaningful practice in an authentic engineering context
    Linked to the following assessments:
  • Be able to complete a written technical report
    Linked to the following assessments:
  • Be familiar with workplace-specific health & safety requirements and responsibilities
    Linked to the following assessments:
  • Be able to articulate a career direction/aim
    Linked to the following assessments:
Edit Learning Outcomes Content
Edit Learning Outcomes Content

Assessment

Edit Assessments Content
Assessment of student learning is based on the completion of five assessment items. This paper is wholly internally assessed. The 'Placement Brief & Health & Safety assignment', and 'Technical Report assignments' are compulsory - failure to submit this report will result in an IC grade for the paper. Student assignments comprises 80% of the grade (assignments detailed below) with the remaining 20% deriving from the student's work performance evaluation. Additional details of the assignments will be provided on Moodle.
Edit Additional Assessment Information Content

Assessment Components

Edit Assessments Content

The internal assessment/exam ratio (as stated in the University Calendar) is 100:0. There is no final exam. The final exam makes up 0% of the overall mark.

The internal assessment/exam ratio (as stated in the University Calendar) is 100:0 or 0:0, whichever is more favourable for the student. The final exam makes up either 0% or 0% of the overall mark.

Component DescriptionDue Date TimePercentage of overall markSubmission MethodCompulsory
1. Placement Brief and Health & Safety assignment
22 Nov 2019
No set time
10
  • Online: Submit through Moodle
✔
2. Learning Objectives: Part 1, setting objectives
29 Nov 2019
No set time
0
  • Online: Submit through Moodle
3. Reflection on a key issue
17 Jan 2020
No set time
10
  • Online: Submit through Moodle
4. Report on organisational awareness
24 Jan 2020
No set time
15
5. Learning Objectives: Part 2, reflection on objectives
7 Feb 2020
No set time
15
  • Online: Submit through Moodle
6. Careeer statement
14 Feb 2020
No set time
5
  • Other:
  • Online: Submit through Moodle
7. Technical Report Draft
21 Feb 2020
No set time
0
  • Online: Submit through Moodle
8. Technical Report Final
25
  • Online: Submit through Moodle
✔
9. Student Work Performance
20
  • Other: Facilitated by the WIL Coordinator
Assessment Total:     100    
Failing to complete a compulsory assessment component of a paper will result in an IC grade
Edit Assessments Content

Required and Recommended Readings

Edit Required Readings Content

Online Support

Edit Online Support Content

This paper has a Moodle page (http://elearn.waikato.ac.nz) where you will be able to access pdfs and assessment materials. There are also discussion forums where you can both ask and answer questions. Your technical report assignment must be submitted electronically through Moodle, no hard-copy submission is required. If your report is deemed 'confidential' please talk to your WIL Coordinator (in such cases, hard copy could be the only way to handle the report)

PLEASE NOTE: Moodle will be used for class notices and it is your responsibility to check the site regularly and read the Moodle email notifications. Instructions provided on Moodle and in lectures are considered to be given to the class as a whole.
Edit Online Support Content

Workload

Edit Workload Content

This paper requires 10 weeks (minimum 400 hours) of work experience at an approved subject-related organisation.The paper is typically undertaken during summer at the end of the second year and commences after the end-of-year exams.Variations to start dates must be approved by the Paper Convenor.

Please note that this is a 30 point paper, not a 15 point paper, and the workload will reflect that of 30 points.

Edit Workload Content

Linkages to Other Papers

Edit Linkages Content
A preceding paper is ENGEN270. The second work placement paper is ENGEN272. This paper also links to ENGEN570.
Edit Linkages Content

Prerequisite(s)

Prerequisites: ENGEN270 or ENGG279

Corequisite(s)

Equivalent(s)

Restriction(s)

Restrictions: ENGG371 and ENGEN271

Edit Linkages Content