ENGME280-20B (HAM)

Design and Manufacturing 1

15 Points

Edit Header Content
Division of Health Engineering Computing & Science
School of Engineering

Staff

Edit Staff Content

Convenor(s)

Lecturer(s)

Administrator(s)

Placement/WIL Coordinator(s)

Tutor(s)

Student Representative(s)

Lab Technician(s)

Librarian(s)

: cheryl.ward@waikato.ac.nz
: debby.dada@waikato.ac.nz

You can contact staff by:

  • Calling +64 7 838 4466 select option 1, then enter the extension.
  • Extensions starting with 4, 5, 9 or 3 can also be direct dialled:
    • For extensions starting with 4: dial +64 7 838 extension.
    • For extensions starting with 5: dial +64 7 858 extension.
    • For extensions starting with 9: dial +64 7 837 extension.
    • For extensions starting with 3: dial +64 7 2620 + the last 3 digits of the extension e.g. 3123 = +64 7 262 0123.
Edit Staff Content

Paper Description

Edit Paper Description Content

The paper builds on the introduction to engineering design taught in ENGEN180 and applies other material taught in years 1 and 2. The paper gives students an understanding of the fundamental principles and basic relationships underlying selected major manufacturing processes widely used in industry. Students undertake an engineering design project with a focus on design for manufacture which is taught through workshops. Engineering design methods are demonstrated through case studies. Knowledge on metrology and non-destructive testing techniques which are critically important in modern manufacturing will also be introduced. The paper also covers the practical aspects of selected major manufacturing processes via workshop and practical sessions where students have plenty of opportunities to build up their practical skills and apply their theoretical knowledge on manufacturing processes to solving practical problems.

Edit Paper Description Content

Paper Structure

Edit Paper Structure Content

The course is taught through a combination of face-to-face lecture discussion, practical design tutorials, and workshop sessions. The scheduled lecture and workshop session content are provided in the attached paper outline. Details of the workshop session will be provided at the beginning of the semester.

Note: due to the impact of COVID-19, the lectures content will be delivered through flipped learning and blended teaching (as per the UoW VC directive). This means that students need to read the lecture notes provided prior to any official lecture discussion/tutorial/review.

Edit Paper Structure Content

Learning Outcomes

Edit Learning Outcomes Content

Students who successfully complete the paper should be able to:

  • apply an engineering design process to the high level design of complex engineering systems
    Linked to the following assessments:
  • apply design specifications to the design of complex engineering systems
    Linked to the following assessments:
  • find solutions to address the basic metrology needs and issues in manufacturing operations
    Linked to the following assessments:
  • explain the scientific principles underlying each of the major non-destructive testing and inspection techniques used in manufacturing
    Linked to the following assessments:
  • explain the scientific principles and basic relationships between process conditions, materials and product quality underlying the major manufacturing processes
    Linked to the following assessments:
  • master basic practical skills for the practical operations in major manufacturing processes covered in the paper including turning, drilling, sheet metal forming, and welding
    Linked to the following assessments:
Edit Learning Outcomes Content
Edit Learning Outcomes Content

Assessment

Edit Assessments Content

While design requires application of appropriate technical procedures, competency in technical communication will also be assessed in this paper. In practice it is largely accomplished by teamwork. Even in situations where (component design etc) it may be undertaken by one engineer, it needs to be checked by a peer. The presentation is as important as the technical analyses. Therefore, all assessed items must be presented in a way so that another student or an engineer will be able to follow the analyses and rationale for the design choices. Correct answers should be supported by clear reasoning. Any ambiguity in the reports or examination scripts may be heavily penalised. Late work will be penalised 5% of its mark for every working day after the hand in date.

2 x Tests on manufacturing processes (30%)

Manufacturing workshop sessions (20%)

CAD project (10%)

Design project (40%):

  • Drawings (10%)
  • Report (20%)
  • Design show demonstration (10% - Design and manufacturing)
Edit Additional Assessment Information Content

Assessment Components

Edit Assessments Content

The internal assessment/exam ratio (as stated in the University Calendar) is 100:0. There is no final exam. The final exam makes up 0% of the overall mark.

The internal assessment/exam ratio (as stated in the University Calendar) is 100:0 or 0:0, whichever is more favourable for the student. The final exam makes up either 0% or 0% of the overall mark.

Component DescriptionDue Date TimePercentage of overall markSubmission MethodCompulsory
1. Test 1
19 Aug 2020
9:00 AM
15
2. Test 2
13 Oct 2020
1:00 PM
15
3. Workshop sessions on manufacturing
20
4. CAD project
10
5. Design project - see breakdown above
40
Assessment Total:     100    
Failing to complete a compulsory assessment component of a paper will result in an IC grade
Edit Assessments Content

Required and Recommended Readings

Edit Required Readings Content

Required Readings

Edit Required Readings Content

Moodle Lecture Notes

Edit Required Readings Content

Recommended Readings

Edit Recommended Readings Content
  • Fundamentals of modern manufacturing: Materials, processes, and, systems, Mikell P. Groover, 5th Edition, Wiley
  • Engineering Drawing, Boundy, A. W., McGraw-Hill, 2007
  • Mechanical Design Engineering Handbook, Peter R. N Childs, 2013
  • Mechanical Engineering Design, Joseph Edward Shigley Charles R Mischke; Richard G Budynas, 2004
Edit Recommended Readings Content

Other Resources

Edit Other Resources Content
SolidWorks CAD software will be available to all students.
Edit Other Resources Content

Online Support

Edit Online Support Content

This paper has a Moodle page (http://elearn.waikato.ac.nz) where you will be able to access lecture notes and assessment materials. There are also discussion forums where you can both ask and answer questions.

PLEASE NOTE: Moodle will be used for class notices etc and it is your responsibility to check the site regularly. Instructions provided on Moodle and in lectures are considered to be given to the class as a whole.

Edit Online Support Content

Workload

Edit Workload Content

This 15pt paper emphasizes on the theories, fundamental principles, and workshop experience of manufacturing processes.

The paper has a total workload of approx. 160 hours as below:

Two 2 hour lecture per 12 weeks (24 hours), six 8 hours workshop sessions plus six 4 hours design project workshops (72 hours), and self-directed study - 50 hours of design project (CAD, calculations, concept and presentation) and 14 hours of reading and revision for the test

Edit Workload Content

Linkages to Other Papers

Edit Linkages Content
This paper builds on the engineering design taught in ENGEN180 / ENGG180.
Edit Linkages Content

Prerequisite(s)

Prerequisite papers: ENGEN180 or ENGEN302

Corequisite(s)

Equivalent(s)

Restriction(s)

Restricted papers: ENGG282 or ENMP214 or ENMP215

Edit Linkages Content